Foreword - Animo OptiBean Service Book

OptiBean /OptiBean XL
© 2015 Animo®
All rights reserved.
No part of this document may be reproduced and/or made public in print, microfilm, electronic media
or any other form without the manufacturer's prior consent. This also applies to the corresponding
diagrams and/or charts.

FOREWORD

Purpose of this document
This document is intended as a service appendix in addition to the user manual with which authorised
trained service personnel can install, program and maintain this machine.
- By authorised trained service personnel is meant: persons who can install, program,
maintain and carry our repairs on the machine.
Most of the settings, including the product settings are secured by a PIN code. This PIN code is
intended to prevent the user accessing the service menu.
It is recommended not to leave this document with the user after installation and to change the
standard factory PIN code.
All chapters and sections are numbered. The various figures referred to in the text can be found in the
illustrations at the front of this booklet or with the subjects concerned.
Pictograms and symbols
NOTE
General instructions for: WARNING, CAUTION or NOTE.
CAUTION !
Warning of possible serious damage to the device or bodily harm
WARNING
Warning of electricity and / or current danger
WARNING
Warning of electrostatic discharge (ESD) to electronics.
WARNING
Warning for serious crushing injury
2015/09 Rev. 1.2
5
EN