Settings (Continued) - Animo OptiBean Service Book

OptiBean /OptiBean XL
Service menu continued ...
Main item Sub-item
2.4 settings
I/0 reset counters
(continued...)
I/0 Quick recipe
Drip tray signal
Demo modus
Stop button
Direct choice
Free vend
I/0 Free vend
Cup sensors
Optilight brewing
process
Telemetry
2015/09 Rev. 1.2
Item Range
yes-no
yes-no
yes-no
yes-no
yes-no
yes-no
yes-no
yes-no
Cup sensor left yes - no
Cup sensor middle yes - no
Cup sensor right yes - no
I/0 Cup sensors yes - no
blink during process yes - no
blink rate 0,1 - 10,0
Optilight
None
MDB
Memory Card
DEX-UCS
Memory Card
55
Set Description
Add menu item Reset counters to the
no
operator menu.
Menu item Snelrecept aan het opera-
no
tormenu toevoegen
Deactivate the drip tray sensor warn-
yes
ing in the software.
This function can be used when the
machine is in a showroom or at a
trade fair. The machine does not then
yes need to be connected to a water sup-
ply. In the display, DEMO is shown
on the bottom line. Keys, LEDs and
the Display operate normally.
If this function is standard set to yes.
yes
To deactivate the stop button, set no
If this function is set to Yes, the
chosen product will be started im-
no mediately, without the start key being
pressed.
Strength setting is possible.
Set the machine for free or paid
yes
vending.
Add/remove menu item 1.0 Free
yes
vend to the operator menu.
yes
yes; cup sensor active
yes
no; cup sensor inactive
yes
Add/remove menu item 1.10 Cup
yes
sensors to the operator menu.
Blinking OptiLight during dispensing
no
a drink
0,3 blinking rate setting
R G B red coulour setting during blinking
No telemetry system connected.
Telemetry system connected via
MBD port. Insert SD card with min.
1Gb in card holder, here the EVA
Memory Card
DTS file will be stored. Data transfer
via MDB connection.
Telemetry system connected via DEX
port. Insert SD card with min. 1Gb in
card holder, here the EVA DTS file
Memory Card
will be stored. Data transfer via DEX
connection.
EN