Animo OptiBean Service Book page 91

OptiBean /OptiBean XL
Display Possible cause
Out of order
For safety reasons, the machine
automatically switches off if the
door is opened.
Door open
Out of order
The machine is on standby.
Stand-by
Door lock not closed properly.
Hot water dispensing not possible.
Close door
Out of order
Rinse program not activated in
time. The machine locks up.
Rinsing
Out of order
Cleaning program is not activated
in time. The machine locks up.
Cleaning
Coffee
Place cup no cup positioned under the spout. position a cup under the spout.
Coffee
no cup positioned under the
place cup under
correct the spout.
correct outlet
your drink has
the cup was taken away to quickly
canceled
2015/09 Rev. 1.2
Action
The machine can be operated with the door
open by using the door pin.
This function can be set manually or auto-
matically.
Close door lock.
Run the rinse program and follow
the instructions in the display.
See chapter 6. Maintenance / 6.1
daily rinsing program
Run the cleaning program and fol-
low the instructions in the display.
6. Maintenance / 6.2 Weekly
rinsing program
position a cup under the correct spout.
keep the cup in position during the drink
preparation.
91
EN