First Menu Settings After Installation - Animo OptiBean Service Book

OptiBean /OptiBean XL

2. FIRsT MENU sETTINGs AFTER INsTALLATION

The following data must be set in the operator and service menus immediately after the machine's first
use. The language factory setting is English.
switch ON the machine
● Follow the instructions on the display
boiler filling
place empty container
press enter (v)
stop? press x
Operatormenu
(Page 46)
● 1.1 Clock
● 1.7 PIN-code
service menu
(Page 49)
● 2.4 Settings
● 2.6 Service boiler
Cups
The message indicates that the device must be descaled. If a water
filter is fitted (recommended), this is also an indication that the filter
must be replaced.
We strongly recommend to use a water filter. Calculate your fillter
capacity by using the capacity information provided with the filter.
Set the amount of cups into the menu so the signal [Service Boiler]
appears on the display.
Months (from software V5.15)
If desired a point of time can de set when the service boiler needs to appear.
Example: If 12 months is set during installation the boiler service message will appear on the
display 12 months after installation.
2015/09 Rev. 1.2
out of order
75 %
boiler filling
Time
Date
2 - 2 - 2 - 2 - 2
Language
Service moment
Cups
Months
9
out of order
90 C
boiler heating
(set)
(set)
(PIN-Code)
(set)
(set)
(set)
place cup
EN
Cleaning
place cup
Service boiler