History Group Configuration Example; Network Requirements; Configuration Procedure - HP 5920 Configuration Manual

History group configuration example

Network requirements

Create an RMON history control entry on the device in
Ten-GigabitEthernet 1/0/1 every minute.
Figure 37 Network diagram

Configuration procedure

# Create an RMON history control entry to sample traffic statistics every minute for Ten-GigabitEthernet
1/0/1. Retain a maximum of eight samples for the interface in the history statistics table.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] rmon history 1 buckets 8 interval 60 owner user1
# Display the history statistics collected for Ten-GigabitEthernet 1/0/1.
[Sysname-Ten-GigabitEthernet1/0/1] display rmon history
HistoryControlEntry 1 owned by user1 is VALID
Sampled interface
Sampling interval
Sampling record 1 :
dropevents
packets
multicast packets : 6
undersize packets : 0
fragments
collisions
Sampling record 2 :
dropevents
packets
multicast packets : 6
undersize packets : 0
fragments
collisions
Sampling record 3 :
dropevents
packets
multicast packets : 6
undersize packets : 0
fragments
: Ten-GigabitEthernet1/0/1<ifIndex.3>
: 60(sec) with 8 buckets max
: 0 , octets
: 8 , broadcast packets
, CRC alignment errors : 0
, oversize packets
: 0 , jabbers
: 0 , utilization
: 0 , octets
: 10 , broadcast packets
, CRC alignment errors : 0
, oversize packets
: 0 , jabbers
: 0 , utilization
: 0 , octets
: 8 , broadcast packets
, CRC alignment errors : 0
, oversize packets
: 0 , jabbers
115
Figure 37 to sample traffic statistics for
: 834
: 1
: 0
: 0
: 0
: 962
: 3
: 0
: 0
: 0
: 830
: 0
: 0
: 0