Punch-In Recording - Yamaha SY99 Owner's Manual

(30...250): While recording you can move the
cursor here to modify the tempo.
Used (0...100%): As you record this will in-
crease to show the amount of sequencer memory
that has been used.
Click (off, rec, rec/play, always): While recording
you can move the cursor here and specify when
the click (metronome) will sound.
off: The metronome will not sound.
rec: The metronome will sound only during
recording.
rec/play: The metronome will sound during
recording or playback.
always: The metronome will sound constantly.
SONG RECORD
Summary: In punch-in recording the notes you play
will be recorded in the exact timing at which you
play them, but only over the measures you
specify.
Procedure:
From: song record display
Press: F3 (Pnch) to select punch-in recording
Specify: the measures over which recording
will take place.
To begin: recording select the track to be
recorded and press R U N . The RUN
LED will blink to the tempo.
To stop: recording and return to the song play
display press STOP.
Measure (001...999): As you record this will
advance to show the number of the measure cur-
rently being recorded.
(30...250): While recording you can move the
cursor here to modify the tempo.
Used (0...100%): As you record this will in-
crease to show the amount of sequencer memory
that has been used.
From Measure (001...999): When the beginning
Remarks: While recording you can modify the set-

Punch-in recording

Remarks: While recording you can modify the set-
Click Beat (1/4,1/6, 1/8, 1/12, 1/16, 1/24): While
recording you can move the cursor here and
specify the beat on which the click will sound.
While recording or playing back, the RUN LED
will blink green on each beat and blink red on the
first beat of each measure.
tings for tempo, click, and click beat. To modify
the other parameters you must return to the
song record display.
of this measure is reached, recording will begin.
The notes you play will replace the previous
data in the track.
To Measure (001...999): When the end of this
measure is reached recording will end, but the
song will continue playing back.
Click (off, rec, rec/play, always): While recording
you can move the cursor here and specify when
the click (metronome) will sound.
off: The metronome will not sound.
rec: The metronome will sound only during
recording.
rec/play: The metronome will sound during
recording or playback.
always: The metronome will sound constantly.
Click Beat (1/4,1/6, 1/8, 1/12, 1/16, 1/24): While
recording you can move the cursor here and
specify the beat on which the click will sound.
tings for tempo, click, and click beat. To modify
the other parameters you must return to the
song record display.
It is a good idea to set the location to a few
measures before the punch-in point specified by
From Measure. This will give you a chance to
get the feel of the section you are going to re-
record.
When the punch-out point specified by To
Measure is reached, but playback will continue.
SONG MODE
205