Yamaha SY99 Owner's Manual page 38

Mark frequently used
pages
Jump and the Auto-Store
function
Practiced programmers may even find the jump function a bit tiresome, since
each jump requires five keystrokes. You will be happy to know that there is a
solution to this, too: you can mark up to five frequently used pages for easy
access with just a couple of keystrokes.
1. To mark a page, press JUMP while holding the SHIFT key down.
2. The page will be added to the menu of marked pages which appears when-
ever you press the JUMP key.
3. To jump to one of the marked pages, simply press the JUMP key followed by
the function key corresponding to the page you wish to jump to.
You will notice that newly marked pages are added to the function key menu in
sequence, from F1 to F5. Once marked pages have been assigned to each of
these five keys, however, new pages are added on a first in/first out basis. This
means that whenever a page is marked, it is assigned to function key F5. At the
same time, the page that was assigned to F1 becomes unmarked, and the other
marked pages (assigned to F2 through F5) shift up to take its place.
You can clear all of the marked pages at once by pressing JUMP followed by
F8 (Mclr).
Whenever you leave Multi Edit or Voice Edit mode after modifying the data,
whether by pressing EXIT or by using the jump function, the Auto-Store message
will appear to ask you whether you want to save your modifications. At this
point you must press F6 (Ret) to return to the edit mode, F7 (Quit) to quit with -
out storing the changes, or F8 (Stor) to store the data.
27