Punch-In Recording; Changing The Song Name - Yamaha Electone Stagea ELS-01 Quick Manual

NOTE
This function is best used
when the phrase to be re-
recorded has definite
beginning and end points,
with slight pauses before
and after.
7
NOTE
When you change the name
of an XG song, the
extension (.mid) cannot be
changed.
18 ELS-01/01C/01X Version 1.8 New Functions

Punch-in Recording

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
This lets you re-record a specific phrase or section which you don't want to use, either
that of a specific part(s) or all parts.
1
Select the song which contains the phrase you want to change.
For details on selecting a song, see page 11.
2
Press the [F] (Play) button to start playback of the song.
3
Press the [K] (Pause) button at the point you want to execute
punch-in recording.
4
Press the [I] (Record) button.
The recording display appears, indicating that the Music Data Recorder is ready
to record.
5
Set the parts which you want to change to "REC" status and
other parts to "PLAY."
6
Press the [F] (Play) button to start punch-in recording. Play the
new phrase, as you want it to be changed.
7
Press the [J] (Stop) button to quit the punch-in recording as
soon as you reach the end of the phrase.
6

Changing the Song Name

You can name the song, such as giving it a title or indicating the date on which it was
recorded. However, song names of the EL-series Electone, such as the EL-900, cannot
be changed.
1
Select the song whose name you want to change.
For details on selecting a song, see page 11.
2
Press the [TOOLS] button at the top right of the display to call up
the TOOLS Page.