Save To Data Card - Yamaha SY99 Owner's Manual

Hide thumbs Also See for SY99:
Table of Contents

Advertisement

CARD UTILITY
Summary: Synthesizer data can be saved to a RAM
card.
Procedure:
From: card utility job directory
Select: 02:Save To Data Card
To execute: the operation press F8 (Go).
To quit: without executing press EXIT.
This job saves all synthesizer data to a RAM card
inserted in the DATA card slot. Before a newly pur-
chased RAM card can be used by the SY99 it must
CARD UTILITY
Summary: Before you use a new RAM card, you
must format it so that the card can be used by
the SY99 or the SY77.
Procedure:
From: card utility job directory (JUMP #812)
Select: 03 :Format data card
To execute: the operation press F8 (Go).
To quit: without executing press EXIT.

2. Save to data card

be formatted using the 4. Format data card function
explained later in this section.
card. The display will ask "Are you sure?" so if you
(JUMP #812)
(JUMP #813)
are sure you want to save the data press YES.
been formatted for the SY99 or the SY77, the LCD
will show "ERROR: IIegal Format !" Press EXIT to
exit from the error message.
This function saves the following data to RAM card.
3. Format data card
This function prepares an MCD64 RAM card (sold
separately) for use by the SY99 or the SY77.
(SY99) or F2 (SY77) to indicate which synthesizer
the card is to be used by. (If "SY77" is selected the
(JUMP #815)
card will be formatted for use by either the SY77 or
the SY99. If "SY99" is selected, however, the card
may not be used by the SY77.) Then press F8 (Go)
to format the data card. The display will ask "Are
you sure?" so if you are sure you want to format the
card press YES.
used by the SY99 the LCD will show an error mes-
sage. Press EXIT to exit from the error message.
Press F8 (Go) to save the synthesizer data to
If the card inserted in the DATA card slot has not
System setup data (System utility, MIDI utility,
and master control settings)
Pan data
Micro tuning data
Internal voices 1-64
Internal multis 1-16
Insert the card into the data card slot. Press F1
If the card is faulty or is a type that cannot be
UTILITY MODE
JUMP #813
JUMP #815
263

Advertisement

Table of Contents
loading

Table of Contents