F5) Initialize Waveform - Yamaha SY99 Owner's Manual

AWM ELEMENT DATA/WAVEFORM EDIT
Summary: You can initialize the currently selected
waveform using this function.
Procedure:
From: Waveform edit
Press: F7 (Name)
To execute: initialization press YES.
To quit: without initializing press NO.
INITIALIZE WAVEFORM
ARE YOU SURE ?
<Yes or No>
This function initializes all sample assignments
for the currently selected waveform.
AWM ELEMENT DATA / WAVEFORM EDIT
Summary: You can use this function to change the
names of internal waveforms.
Procedure:
From: Waveform edit
Press: F7 (Name)
Specify: the waveform name.
AWM ELEMENT DATA / WAVEFORM EDIT
Summary: Here you can edit the original key, key
range, volume, pitch, and loop settings for each
sample.
Procedure:
From: waveform edit
Press: F8 (Smpl)
Select: one of the samples assigned to the
currently selected waveform.

2. (F5) Initialize waveform

2. (F7) Waveform name
2. (F8) Sample assign
If you are sure you want to initialize the wave-
form, press YES.
When a waveform is initialized, it is renamed
"INT-WAVE" automatically. Dashes are displayed
in the "From" and "To" columns for initialized
waveforms when the Waveform edit function is
selected.
Remark: This function initializes the settings for a
single waveform only. It does not initialize the
SY99's internal sample memory. To initialize
sample memory, use the initialize sample proce-
dure described in Sample utility 5.Initialize
sample, page 278.
Enter an eight-character name for the waveform.
To clear the currently entered name press F1
(Clr).
To switch to upper-case letters press F2 (Uppr).
To switch to lower-case letters press F3 (Lowr).
Remarks: Methods of entering character data are
explained in How to enter character data, page
30.
Specify: the original, low key, and high key
assignments for the selected sample.
To rename: the. sample, press F7 (Name).
To edit: the volume, pitch and loop settings for
the sample, press F8.
VOICE EDIT MODE
1 6 1