Recording/Editing Arpeggio Playback As Midi Data On Cubase - Yamaha MOXF6 Owner's Manual

4.
Play back the recorded data.
Make the following settings then listen to the playback sound through the Cubase mixer.
MOXF6/MOXF8 Instrument
Direct MonitorSW Part: off
Cubase Mixer
MOXF6/MOXF8 Editor VST instrument channel: mute off
You can enhance the sound by applying EQ or effects to the Editor VST track (MIDI track). For detailed
instructions, refer to the Cubase manual.
5.
Convert the recorded MIDI track to audio data.
On Cubase, select [File]  [Export]  [Audio Mixdown] to convert the recorded MIDI data to audio
data. For details, see Cubase manual.
6.
Create an additional MIDI track for Editor VST.
On Cubase, select [Project]  [Add Track]  [MIDI] to add the MIDI track.
Set the Input routing of the track to "All MIDI Inputs" and Output to "MOXF6/
MOXF8 VST." You can record additional tracks by repeating steps 2 to 6 above.
7.
Save the Cubase Project.
On Cubase, select [File]  [Save] or [Save As...] to save the Cubase Project.

Recording/Editing Arpeggio playback as MIDI data on Cubase

If you set the Arpeggio to "on" on the Editor VST in step 2 on
including the Arpeggio playback as audio. If you only want to record Arpeggio playback as audio data, then
follow the previous instructions. However, if you want to edit the MIDI events of the recorded Arpeggio, follow
the instructions here below.
1.
Create a MIDI track and start the MOXF6/MOXF8 Editor VST in Cubase by executing the
steps on pages
On the Editor VST, set the mode to "Song" or "Pattern."
2.
Make the settings for recording.
On the MOXF6/MOXF8:
Create a Quick Setup including the following settings on the MOXF6/MOXF8, then select the created
Quick Setup.
The Quick Setup can be selected from the Editor VST as well as on the MOXF6/MOXF8 itself.
MIDI Local Ctrl
MIDI Sync
Clock Out
ArpOutSw
TrExtSw
AUDIO Mode
Direct MonitorSw Part
MOXF6/MOXF8 Editor Owner's Manual
4 – 5.
on
auto
off
all on (Enables MIDI output of Arpeggio playback data from the MOXF6/
MOXF8)
When the Key Mode is set to other than "direct," "sortdirect," or "thrudirect":
all off (Disables MIDI output of played notes)
When the Key Mode is set to "direct," "sortdirect," or "thrudirect":
all on (Enables MIDI output of played notes)
VST
on (Enables you to monitor the MOXF6/MOXF8 sound directly.)
page 51, you can record your performance
Tips
52