Yamaha SY99 Owner's Manual page 48

Make effect settings for
the multi
Other settings in multi edit
mode
Save the newly created
multi
Press EXIT to return to the Multi Edit job directory.
Press F7 (07) to select 07:Effect from the Multi Edit job directory and then press
Fl (01) to select 01:Effect Mode Select. With the initial settings the Effect Mode
will be off. Press +1/YES twice to set the effect mode to "parallel".
With the initial settings, effect type l:Rev.Hall is selected for both effect units.
Press EXIT twice to return to the Multi Edit job directory.
To keep this example simple, we will leave the rest of the multi settings at their
initial values. After completing this tutorial, you can read about Multi edit in the
Reference section to learn more about setting up a multi.
From the Multi Edit job directory press EXIT. Since you have modified the data,
the top line of the display will blink "Auto-store multi".
Press F8 (Stor) and the multi will be stored into the currently selected multi
memory. Or, if you want to keep the previous data of that multi, use the memory
select buttons 1-16 to specify a different memory before you press F8 (Stor).
The bottom line of the display will ask "Are you sure?". Press +1/YES and
the newly edited multi will be stored, and you will return to multi play mode.
37