Operator On/Off - Yamaha SY99 Owner's Manual

AFM ELEMENT DATA
Summary: Any time while editing an AFM element,
you can turn the output of each operator off/on.
This is useful when you want to hear how each
operator affects the others, or when you want to
hear only certain operators.
Procedure:
From: any job in the AFM job directory
Press: the OPERATOR ON/OFF buttons (memory
select buttons 9-14) to turn operators 1-
6 on/off.
The on/off condition of each operator is shown in the
upper right of the LCD when editing an AFM ele-
AFM ELEMENT DATA
Summary: You can view a graphic display of the
current algorithm at any time while editing an
AFM element and select a different algorithm if
you wish. Since the algorithm determines how
each operator functions, you should always be
aware of the algorithm when editing AFM oper-
ator data.
Procedure:
From: any job in the AFM
job directory
Press: F8 (Alg)
To exit: to the previous editing job press EXIT
AFM ELEMENT DATA
Summary: While editing AFM element parameters
other than EG, Output, Filter, or Effect, you can
copy data from an element of another voice to
the element you are now editing.
Procedure:
From: AFM element job 1, 2, 6, or 7
Press: COPY
Press: Fl (Src) and select the source voice
Press: F2 (Elem) and select the source
element
To execute: the copy operation press F8 (Go)

Operator on/off

AFM algorithm
(JUMP #231-#255)
(JUMP #234)
Copy element
ment, and also indicated by the OPERATOR ON/OFF
LEDs. Operators that are on are displayed in in-
verse. In the following LCD all operators are on.
Remarks: If you turn off all the carrier operators
there will be no sound.
This function is provided as a help in editing.
Operator on/off settings are not stored as part of
voice data.
When you select a different AFM or AWM
element or exit element editing, all operators
you turned off will be turned back on.
To return to the previous display, press EXIT.
Note: When you select an algorithm, all settings
which modify the routings in the algorithm
(feedback, input, etc.) will be cleared to their
initial settings.
Source Voice Select: Specify the memory
(internal, card, preset 1 or preset 2), the bank
A-D, and the number 1-16 of the voice from
which you want to copy element data.
Source Voice: The number and name of the
selected source voice is displayed.
VOICE EDIT MODE
JUMP #234
135