Transmit Filter - Yamaha SY99 Owner's Manual

UTILITY MODE
MASTER CONTROL
Summary: Specify whether each type of MIDI data
on each channel will be transmitted or not when
in master control mode.
Procedure:
From: master control utility
directory
Select: 2:Transmit Filter
Specify: whether or not each type of message will
be transmitted on each channel
288

2. Transmit filter

(JUMP #831)
(JUMP #837)
The filter settings in this display are common to all
eight master controllers, and are effective only when
in master controller mode.
Move the cursor in this area and specify whether
or not Program Change, Control Change, Pitch
Bender, Sustain, Aftertouch, or Main Volume
messages will be transmitted from each channel
by the master controllers. An "x" symbol indi-
cates that the data will not be transmitted.
JUMP #837