Yamaha SY99 Owner's Manual page 127

VOICE EDIT MODE
36:Aural Exe Rev (Aural Exciter®*)
No.
Parameter Name
1 Ex. HPF
2
Ex. Enhance
3 Ex. Mix Level
4
Reverb Time
5 Rev High
6 Rev Diffusion
7 Rev Initial Delay
8 Rev Mix Level
9 HPF
1 0 LPF
This effect type provides an exciter effect which is
then fed into a reverb effect. For details refer to
22.Aural Exciter (page 112) and l.Rev Hall (page
109).
Rev Mix Level: This determines the proportion be-
tween exciter and reverb sound. At a setting of
0%, only the exciter sound will be heard. At a
setting of 100%, only the reverb sound will be
heard.
Aural Exciter® is a registered trademark and is
manufactured under license from APHEX
Systems Ltd.
37:Dist Rev
No.
Parameter Name
1 Distortion Level
2 Middle Frequency
3 Mid Gain
4 Treble Gain
5
Reverb Time
6 Rev High
7 Rev Initial Delay
8 Rev Mix Level
9 HPF
LPF
1 0
This effect type provides a distortion effect which is
then fed into a reverb effect. For details of the
reverb parameters, refer to l.Rev Hall (page 109).
Distortion Level: This determines the degree of dis-
tortion. At higher settings, the sound will be
strongly distorted.
1 1 6
Range
500 Hz ...16 kHz
0 ... 100 %
0 ... 100 %
0.3 ... 30.0 sec
0.1 ... 1.0
0 ... 10
0.1 ... 400.0 ms
0 ... 100 %
Thru, 32 ... 1000 H2
1 ... 16 kHz, Thru
Range
0 ... 100 %
315 Hz ... 6.3 kHz
-12 ... +12 dB
-12 ... +12 dB
0.3 ... 30.0 sec
0.1 ... 1.0
0.1 ... 400.0 ms
0 ... 1 0 0 %
Thru, 32 ... 1000 Hz
1 ... 16 kHz, Thru
Rev Mix Level: This determines the proportion
between distortion and reverb sound. At a
setting of 0%, only the distortion sound will be
heard. At a setting of 100%, only the reverb
sound will be heard.
38:Dist Dly L,R
No. Parameter Name
1 Distortion Level
2 Middle Frequency
3 Mid Gain
4 Treble Gain
5 Dly Lch Delay
6 Dly Rch Delay
7 Dly FB Gain
Delay Mix Level
8
9 HPF
LPF
1 0
This effect type provides a distortion effect which is
then fed into a delay effect. For details refer to
36.Dist Rev above and 16.Delay L,R (page 110).
Delay Mix Level: This determines the proportion
between distortion and delay sound. At a setting
of 0%, only the distortion sound will be heard. At
a setting of 100%, only the delay sound will be
heard.
39:Dist Echo
No. Parameter Name
1
Distortion Level
2 Middle Frequency
3 Mid Gain
4 Treble Gain
5 Echo Lch Delay
6 Echo Rch Delay
7 Echo FB Gain
8
Echo Mix Level
9 HPF
LPF
1 0
This effect type provides a distortion effect which is
then fed into a stereo echo effect. For details refer to
36.Dist Rev above and 18.Stereo Echo (page
111).
Range
0 ... 100 %
315 Hz ... 6.3 kHz
-12 ... +12 dB
-12 ... +12 dB
0.1 ... 1360.0 ms
0.1 ... 1360.0 ms
-99 ... +99 %
0 ... 100 %
Thru, 32 ... 1000 Hz
1 ... 16 kHz, Thru
Range
0 ... 100 %
315 Hz ... 6.3 kHz
-12 ... +12 dB
-12 ... +12 dB
0.1 ... 680.0 ms
0.1 ... 680.0 ms
-99 ... +99 %
0 ... 1 0 0 %
Thru, 32 ... 1000 Hz
1 ... 1 6 kHz, Thru