Yamaha SY99 Owner's Manual page 36

Function keys (4)
Move between jobs using
(page) (5)
To return to the job directory, press EXIT.
In most screens, you can press the function keys F1-F8 to move the cursor or
perform various operations. In the above display for "2.Volume", pressing F1-F8
will move the cursor to channels 1-8 of the multi
Notice that an inverted "S" is displayed at the bottom right. This means
that the function keys will perform additional functions when pressed while hold-
ing the SHIFT key. While you press and hold the SHIFT key in this screen, function
keys F1 and F2 will switch the screen between channels 1-8 and channels 9-16
of the multi.
Suppose that you wanted to move from the "2.Volume" job to the "3 .Tuning"
job. You could press EXIT to return to the job directory, and then press 3 and
ENTER to move to "3 .Tuning", but there is a faster way.
To move between jobs of the same level (i.e., inside the same job directory),
use the PAGE keys. For example if you are now in the "2.Volume" job,
pressing PAGE would take you to the "1. Voice" job, and pressing PAGE
would take you to the "3 .Tuning" job. When moving to a nearby job, this is
usually faster than returning to the job directory.
Select a main mode
Enter edit mode
Use the cursor or
numeric keypad to select
a page, and press ENTER.
25