Move Clock - Yamaha SY99 Owner's Manual

SONG MODE
SONG EDIT JOBS 2
Summary: This operation moves the specified mea-
sures of the track forward or backward in time.
Procedure:
From: song edit job directory 2 (JUMP #606)
Select: 09:MovClck
Specify: the track which you wish to move in
time and set the number of clocks by
which to move it.
Press: a track select button 1-15 to select a
track.
To execute: the operation press ENTER.
To quit: without executing press EXIT.
Area (001... 999); The measures beginning with
the specified Top Measure and ending with the
specified Last Measure will be moved in time.
SONG EDIT JOBS 2
Summary: This operation copies a specified range of
measures in one or more tracks to another loca-
tion in the same track.
Procedure:
From: song edit job directory 2 (JUMP #606)
Select: 10:CpyMeas
Specify: the area of source measures from
which you wish to copy, the destina-
tion measure to which the data will be
copied, and the number of times that
the data will be copied.
Press: one or more track select buttons 1-15
to select the tracks.
To execute: the operation press ENTER.
To quit: without executing press EXIT.
224

9. Move clock

(JUMP #615)
Remarks: It is often effective to use clock move to
10. Copy measure
(JUMP #616)
Clock (-99...+99); Specify the number of clocks
(units of 1/96th of a quarter note) by which the
track is to be moved. Positive settings will move
the track forward in time so that it plays later.
Negative settings will move the track backward
in time so that it plays earlier.
compensate for voices that have a slow attack.
For example strings often have a slower attack
than other voices, and will appear to be lagging
behind the other voices even if the note on mes-
sages are actually simultaneous. In such cases
you can use this Move Clock operation to move
the strings track earlier in time so that the string
voices begin playing a bit before than the other
voices to improve the perceived timing;
Source (001...999): The measures beginning
with the specified Top Measure and ending with
the specified Last Measure will be copied.
Destination (001...999): The data will be copied
into the same track starting at the specified Top
Measure.
Copy (1...99): The specified source measures
will be copied as many times as specified here.
JUMP #615
JUMP #616