Copy Track - Yamaha SY99 Owner's Manual

SONG MODE
Remarks: All song data will be copied from the
source to the destination. The tempo, transmit
channels, next song, next mode, and song name
for the destination song will be the same as
those for the source song.
If the destination song is already occupied by
song data, this data will be erased by the copy
operation. Before executing the copy song oper-
ation, always check to be certain that the desti-
nation song does not contain data you wish to
keep.
SONG EDIT JOBS 1
Summary: This operation allows you to copy a track
from one song to another.
Procedure:
From: song edit job directory 1 (JUMP #600)
Select: 04:Copy Track
Specify: the song from ,which a track is to be
copied, and the song to which it is to
be copied.
Press: a track select button 1-16 to select a
track to copy.
To execute: press ENTER.
To quit: without executing, press EXIT.
Source (1...10): Specify the song from which the
selected track is to be copied.
Destination (1...10): Specify the song to which
the selected track is to be copied.
216
Errors: An attempt to copy a song will result in an

4. Copy track

Remarks: All song data for the selected track will
(JUMP #604)
Errors: An attempt to copy a track will result in an
error under any of the following conditions:
When there is not sufficient sequencer
memory to perform the copy operation.
When the same song is specified as both the
source and destination.
be copied from the source to the destination. A
song may become longer as a result of the copy
track operation, if the track copied is longer than
the destination song. However, the measure
table of the destination song will not be changed
as a result of the operation.
If the selected track of the destination song
is already occupied by song data, this data will
be erased by the copy operation. Before execut-
ing the copy track operation, always check to be
certain that the selected track of the destination
song does not contain data you wish to keep.
error under any of the following conditions:
• When there is not sufficient sequencer
memory to perform the copy operation.
• When the same song is specified as both the
source and destination.
JUMP #604