Yamaha SY99 Owner's Manual page 60

Specify a filename
Save the data to disk
Select 03:Sequencer All, and press ENTER to get the following display.
If files containing Sequencer All data have already been saved on this disk, the
filenames will be displayed. Move the cursor in this area to select a disk file to
which you want to save your newly recorded song. For this example, select any
filename of "- NEW -*".
Press F7 (Name). This allows you to give an eight character name to the file.
Press F1 (Clr) to clear the currently entered name. Then specify a filename, us-
ing the numeric keypad to enter characters. Each time you press one of the
numeric keys, the LCD will cycle through the number printed on the numeric key
and the three alphabetical characters printed below it. Press F2 (Uppr) to switch
to upper-case characters. Press F3 (Lowr) to switch to lower-case characters.
After you have entered a name for the disk file press F8 (Go). The bottom line of
the display will ask "Are you sure ?" If you are sure that you want to save the
data, press YES and the data will be saved to the specified disk file.
Press any mode select button to leave this job.
49