Battery - Yamaha SY99 Owner's Manual

Hide thumbs Also See for SY99:
Table of Contents

Advertisement

APPENDIX
Illegal input!
You attempted to enter an invalid data value in
Edit Insert mode.
Change internal battery !
The internal backup battery needs to be re-
placed.
Change wave BAT!
The backup battery for the internal MDR/sample
RAM area or an expansion memory board (as
specified in the message) needs to be replaced.
Use bank D !
The voice must be stored in bank D.
Only C1-C6 data valid !
You are attempting to save a drum voice to bank
A, B, or C. Only the data for notes Cl through
C6 will be saved as a result of this operation.
Save the voice to bank D if you wish to save the
data for all notes E0 through G6.
Please allocate sample memory !
You attempted to enter Sample utility mode, but
no memory has been allocated for sample use.
Please use the System utility memory allocate
function to allocate memory for sample use.
Not enough memory for sample !
You attempted to reduce the memory area allo-
cated for sample use beyond the minimum
required by currently existing samples. Please
initialize the sample memory or delete samples
before attempting to reduce the amount of MDR/
sample RAM allocated for sample use.
320
Internal buffer full!
More sequence data was played back than could
be sounded.

Battery

Change card battery !
The card backup battery needs to be replaced.
Other
Illegal mark!
You attempted to mark a display page while
using the compare function.
Use bank A-C !
The voice must be stored in bank A, B, or C.
Sample
Sample data not exists !
You attempted copy or save sample data from a
sample number which does not contain any data.
Sample data protected !
Copy-protected sample data may not be saved
to disk or transmitted via MIDI dump.

Advertisement

Table of Contents
loading

Table of Contents