Drum Set Data - Yamaha SY99 Owner's Manual

VOICE EDIT MODE

DRUM SET DATA

Summary: This job directory shows the jobs con-
taining data for a drum voice.
Procedure:
From: voice edit mode
When: the Voice Mode is set to 11:Drum Set
Select: the drum set job directory
F2 (Com)
This area indicates that "Drum Set" is the
selected voice mode.
Move the cursor in this area to select a job and
press ENTER to go to the selected job.
DRUM SET DATA
Summary: Adjust the overall volume of the entire
drum voice.
Procedure:
From: drum set job directory
Select: 01:Voice Volume
Specify: the volume of the entire drum set
172
Drum set data
Drum set job directory
(JUMP #200)
(JUMP #272)
1. Voice volume
(JUMP #272)
(JUMP #273)
01: Voice Volume: Adjust the overall volume of
the entire drum voice.
02: Wave Data Set: Select a waveform for each
key of the SY99's 76-note keyboard, and
specify tuning and pan for each.
03: Effect Set: Specify how the effect units are
connected, how the sound from each note of
the drum voice is sent to the effect units,
parameter settings for each effect unit, and
how the effect parameters are controlled in
realtime.
04: Controller Set: The overall volume of a drum
set voice can be adjusted using a specified
controller.
05: Name: Specify a ten-character name for the
voice being edited.
07: Initialize: Initialize the drum set data being
edited to the basic or minimum settings.
08: Recall: Recall the previously edited voice
into the editing buffer.
Voice Volume (0...127): This determines the
overall volume of the entire drum voice.
JUMP #272
JUMP #273