Disk Save Type - Yamaha SY99 Owner's Manual

UTILITY MODE
DISK UTILITY
Summary: This setting determines whether disk
save operations for data types "All data",
"Synthesizer all" and "Sequencer All" will be
performed in SY99 format or in SY77 format.
Procedure:
From: disk utility mob directory
Select: 08:Disk Save Type
Press: Fl (SY99) or F2 (SY77) to select the disk
format
To exit: the disk type selection press EXIT
274
8. Disk type
You will need to make this setting only when you
wish to save "All Data", "Synthesizer All" and
"Sequencer All" data to a disk which will be later
loaded by an SY77.
(JUMP #816) between the SY99 and the SY77, "01:A11 Data".
"02:Synthesizer All" and "03:Sequencer All"
formats are not compatible. The SY99 "All Data"
contains synthesizer, sequencer, waveform, sample
and MDR data, but the SY77 "All Data" contains
only synthesizer and sequencer data. The SY99
"Synthesizer All" is in a different format than the
SY77 "Synthesizer All".
ory, it can be saved to disk in either format.
set to "SY99" format.
Although most types of disk file are compatible
Once the data has been loaded into SY99 mem-
When the power is turned on, this will always be