Initialize Voice - Yamaha SY99 Owner's Manual

Hide thumbs Also See for SY99:
Table of Contents

Advertisement

DRUM SET DATA
Summary: Initialize the drum set data being edited
to the basic or minimum settings.
Procedure:
From: drum set job directory
Select: 07:Initialize
To execute: the initialize operation press YES
To quit: without executing press NO or EXIT

INITIALIZE VOICE

ARE YOU SURE ?
<Yes or No>
This function sets all drum set data to the basic or
minimum settings. If you are creating an entirely
new voice, using this initialize function may be
faster than resetting all the parameters by hand.
If you are sure you want to initialize the drum set
data press YES and the data will be set to the values
shown below. If you decide not to initialize, press
NO.
This function initializes only Drum Set data.
Other initialize functions are provided for initializing
Voice Common data, AFM Element data, or AWM
Element data.
DRUM SET DATA
Summary: Recall all data of the previously edited
voice.
Procedure:
From: drum set job directory
Select: 08:Recall
To execute: the recall operation press YES
To quit: without executing press NO or EXIT.
RECALL VOICE
ARE YOU SURE ?
<Yes or No>
7. Initialize voice
Initialized settings for Drum Set data
01 Voice volume
(JUMP #271)
02 Wave data set (for each Key Note Number)
03 Effect set
04 Controller set
05 Drum set name
8. Recall voice
If after editing a voice you exit voice edit mode
without storing, the edited voice data will be lost. in
such cases you can use this function to recall the
(JUMP #271)
previously edited data into the editing buffer.
Note: This operation recalls voice data, not just
Voice volume
= 127
Level
= 127
Waveform
= preset 1 86 BD1
Note shift
= 0
Fine tuning
= 0
Alternate
= off
Output group
= both
Static pan
= 0
*** same as normal voice initial data except for
Effect Send *** (for each Key Note Number)
Effect send sel
Effect send level
Effect send velocity sense = 0
Volume Low Limit = 0
Device
= 14
Name
= INIT VOICE
Drum Voice data, and is also available while
editing Common data, AFM Element data, or
AWM Element data. For details refer to Voice
Common 16. Recall voice, page 133.
VOICE EDIT MODE
= all on
= 127
177

Advertisement

Table of Contents
loading

Table of Contents