Erase Event - Yamaha SY99 Owner's Manual

SONG EDIT JOBS 2
Summary: This operation erases all data of a speci-
fied type from specified measures of the track.
Procedure;
From: song edit job directory 2 (JUMP #606)
Select: 07:ErsEvnt
Specify: the area of track measures from which
you wish to erase data, and specify
the type of data to be erased.
Press: a track select button 1-15 to select a
track.
To execute: the operation press ENTER.
To quit: without executing press EXIT.
SONG EDIT JOBS 2
Summary: This operation shifts all notes of a speci-
fied note number to another note number.
Procedure:
From: song edit job directory 2 (JUMP #606)
Select: 08:NtShift
Specify: the area of track measures for which
you shift notes, and specify the original
and new note numbers.
Press: a track select button 1-15 to select a
track.
To execute: the operation press ENTER.
To quit: without executing press EXIT.

7. Erase event

(JUMP #613)
When you press ENTER all data of the specified
types will be erased from the specified range of
measures.
8. Note shift
(JUMP #614)
Top Measure (001...999): Specify the first mea-
sure to be affected.
Last Measure (001...999): Specify the last
measure to be affected.
Parameter (Aftertouch, Pitch Bend, Control
Change, System Exclusive): Set this to "on" for
each type of data you wish to erase.
Top Measure (001...999): Specify the first mea-
sure to be affected.
Last Measure (001...999): Specify the last
measure to be affected.
Note (C-2...G8 = 000...127): Specify the origi-
nal note number.
To (C-2...G8 = 000...127): Specify the new note
number.
When you press ENTER all notes of the number
specified by "Note" will be shifted to the note num-
ber specified by "To".
Remarks: This operation is often useful when con-
trolling a drum machine from the SY99's
sequencer. Most drum machines play specific
sounds for each note. For example, shifting all
D#2 notes to F#2 might change all snare hits to
hi-hat hits. Consult the instrument/note table for
your drum machine.
SONG MODE
JUMP #613
JUMP #614
223