Error Messages - Yamaha SY99 Owner's Manual

Hide thumbs Also See for SY99:
Table of Contents

Advertisement

APPENDIX
MIDI buffer full !
When the SY99 attempted to receive or transmit
a large amount of MIDI data, its handling capac-
ity was exceeded.
MIDI data error!
An error occurred when receiving MIDI data.
MIDI checksum error!
An error occurred when receiving bulk data.
Data empty !
Sequence data (bulk) was received, but the
message contained no data.
Bulk rejected; sample exists !
An unoccupied sample number could not be
found, so the bulk sample data was not received.
Data card not ready !
The data card is not correctly inserted into the
slot.
Card protected !
Since the memory protect switch of the card is
on, data cannot be saved to the card.
Illegal format!
The card is the wrong format.
318

Error messages

MIDI
Song memory full!
When receiving sequence data (bulk), the inter-
nal memory capacity was exceeded, and not all
the data was received.
Device number is off!
Since the device number is off, bulk data cannot
be transmitted or received.
Device number mismatch !
Since the device numbers did not match, the bulk
data was not received.
Bulk canceled!
While receiving or transmitting bulk data, EXIT
was pressed to abort the operation.
Data card
Verify error!
The data was not correctly saved.
Illegal size!
The data card is not of the 64 Kbyte variety ac-
cepted by the SY99.
\

Advertisement

Table of Contents
loading

Table of Contents