Using Functions While In A Call - Mitel 622 DECT User Manual

Using functions while in a call

This section explains the different options provided by your phone while you are in
a call.
Enquiry call during a call
You want to call someone else briefly without losing your current call partner. Then you
want to resume your conversation with your original call partner.
With the function you can call someone else in the middle of a call and put your
Enquiry
original call partner on hold. You can make enquiry calls to both internal and external
users.
Enquiry
<Phone number>
End call
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
You are making/taking a call:
Press the softkey.
Enquiry
Enter the phone number of the enquiry call party.
➔
Enquiry call party is called; first call partner is on hold.
Note:
You can also find the call number of the user you want in the phone book
or in a call list.
To end the enquiry call:
Press the softkey or the End key.
End call
➔
You are now back through to your original call partner.
Notes:
• If your enquiry call party hangs up and you also go on-hook by mistake,
you will hear a continuous ringing signal for 10 seconds to draw your
attention to the person still on hold. If you press the Call key during the
continuous ringing, you will be reconnected with your first call partner.
• If the other user does not answer, you can cancel the enquiry call with
the softkey and take back the first call.
End call
Supplementary features
43