Mitel 622 DECT User Manual page 80

Personalizing your phone
Activating Bluetooth mode and Bluetooth devices
You want to make and receive phone calls with a Bluetooth-supported headset.
You can activate Bluetooth devices as soon as you have activated the Bluetooth mode.
You can activate or deactivate the Bluetooth manually.
Notes:
• Only one Bluetooth connection at a time is possible.
• To find out how to make phone calls with the headset, refer to the chapter "Using a
headset", page
Settings
Bluetooth
Enable Bluetooth
Subscribe headset
Select headset
Delete
80
25
.
Press the navigation key to the right or the
Scroll to
Settings
Scroll to
Bluetooth
Activating/deactivating Bluetooth mode:
Scroll to
Enable Bluetooth
➔
The setting is stored,
Or:
The Bluetooth-mode is also available via the service menu: Press key 5
and hold it down for a moment,
Note:
An activated Bluetooth mode does not imply that a Bluetooth connection
is running.
Pair new device:
Scroll to
Subscribe headset
Switch on the device you want and set to subscribe mode. Select the
device you want and enter the Bluetooth device PIN.
➔
Device is paired,
List of paired devices:
Switch on the device you want, scroll to
softkey and select a device from the list.
➔
The list of coupled devices is displayed.
Note:
The list is limited to 2 Bluetooth devices. Remove a device before you
connect another one.
Remove device:
Scroll to
Select headset
Select the device you want and press the
➔
Device was removed.
and press the
Select
and press the
Select
and press the
is displayed.
Activate
and press the
is displayed.
and press the
softkey.
Menu
softkey.
softkey.
softkey.
Select
Bluetooth.
softkey.
Select
headset, press the
Select
softkey.
Select
softkey.
Delete
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
Select