Mitel 622 DECT User Manual page 83

Changing the Admin PIN
You want for example to protect the alarm settings against unauthorized or unintentional
changes.
You can define and activate an Admin PIN. This means that, if the valid Admin PIN is not
entered, you can only view the alarm settings and not modify them. As long as you have
not defined the Admin PIN all alarm settings are freely accessible, without a PIN prompt.
If you have forgotten your Admin PIN, your system administrator can reset it.
Note:
Do not confuse the Admin PIN with the User PIN (see chapter "Changing the User PIN",
82
page ).
Settings
General
Administration
New admin PIN
Enter the display text for the idle state
You want to change the text displayed by your phone in the idle state.
In addition to the date and time you can enter a personal text for the text displayed in the
idle state.
Settings
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
Press the navigation key to the right or the
Scroll to and press the
Settings
Scroll to and press the
General
Scroll to
Administration
1. Scroll to
New admin PIN
2. Enter the PIN you want and confirm with the
➔
The setting is stored.
Note:
Delete the current PIN if you prefer to enter your alarm settings without
the Admin PIN.
Press the navigation key to the right or the
Scroll to and press the
Settings
softkey.
Select
softkey.
Select
and press the
Select
and press the
Select
softkey.
Select
Personalizing your phone
softkey.
Menu
softkey.
softkey.
softkey.
Ok
softkey.
Menu
83