Mitel 622 DECT User Manual page 68

Supplementary features
Ignore
Direct response without a triggered alarm:
You can execute the direct response function without the patient having triggered an alarm first.
This function must be stored under a function key (see chapter "Configuring keys", page 91).
Note:
Direct response is a special variation of the intercom feature (see "Starting an announce-
41
ment", page ). The differences are as follows:
• Direct response can only be used with a specifically configured Mitel Alarm Server.
• Direct response can only be triggered using the
is received.
Hotline Alarm
[c]
The hotline alarm
all other fields where a Mitel Alarm Server is used.
A user needs help and picks up the handset or presses the loudspeaker key. Thereafter,
he is automatically routed to the hotline destination number preconfigured in the Mitel
Alarm Server, i.e. to the responsible nursing staff. The nursing staff answers the call and
is connected with the user seeking help.
Alarm cancellation delay: Your system administrator can set a delay (depending on the
Mitel system phone). During this delay the user can enter another call number in order not
to trigger a call on the hotline destination number. If the user does not dial another phone
number during this predefined time or puts the handset back down again, a connection
with the Hotline number is automatically set up.
If the hotline destination number (i.e. the nursing staff) is busy, the call is routed according
to the system configuration. Contact your system administrator for more information.
Hotline (for internal users):
68
Ignoring an alarm:
Press the softkey on your staff phone.
Ignore
➔
The alarm remains active and the alarm signal is deleted from the staff
phone.
Deleting the alarm:
You can delete the alarm directly from the alarm button next to the bed.
➔
The alarm ends and the alarm signal is deleted from the staff phone.
is mainly used by nursing staff in the health care sector as well as in
User needs help:
User picks up the handset of his phone or presses the loudspeaker key.
➔
A connection with the hotline number is automatically set up after 30
seconds or any predefined time without the user having to do anything
else.
softkey once an alarm
Direct response
eud-1720/1.0 – R3.0 – 08.2015
Mitel 622 DECT Phone