Formulating Functions - Mitel 622 DECT User Manual

Personalizing your phone

Formulating functions

This section explains how to express and execute an individual function, for exam-
ple call forwarding, using function commands and function codes.
Function commands, function codes
You can use the predefined selection to allocate functions to a configurable key (see
chapter "Storing a function on a key - function key", page 92). You can also write your
own functions using function commands and function codes (select
function). The function commands are listed here; the function codes can be found in the
User's Guide User Guide Function Codes on the
You can use function commands to define a function to suit your personal requirements.
A function can consist of one or more function commands, function codes, and the phone
number.
The following function commands are available:
"I"
"H"
"X"
"P"
"N"
"."
"Z"
"R"
"Y"
Other formulation examples:
"IR"
"I201"
"I*21201X"
96
Seize line
Seize line in hands-free mode
Disconnect
Pause 1 second before the next operation
Use the phone number entered in call preparation
Control key function (up-circuit system)
Activate/deactivate DTMF mode
Use the phone number last dialled
Disconnect and reseize the line
Seize line ("I"),
Dial phone number last dialled ("R")
Seize line ("I") and dial phone number 201
Seize line ("I"),
activate call forwarding unconditional ("*21") to phone number 201,
disconnect ("X")
Mitel DocFinder.
Free configurable
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015