Mitel 622 DECT User Manual page 82

Personalizing your phone
Changing the User PIN
You want to change the PIN used to lock/unlock your phone (see chapter "Locking your
phone", page 72 and "Unlocking your phone", page 73).
The digit combination "0000" is set as default. You can select any 2 to 8-digit combination
for your new PIN.
If you have forgotten your PIN, your system administrator can reset it to the default set-
ting.
Notes:
• Your user PIN applies to all your phones.
• Do not confuse the User PIN with the Admin PIN (see chapter "Changing the Admin
83
PIN", page ).
Settings
General
New user PIN
<Old PIN>
<New PIN>
<New PIN>
82
Press the navigation key to the right or the
Scroll to and press the
Settings
Scroll to and press the
General
Scroll to
New user PIN
➔
The display shows
Enter the old PIN and confirm with the
➔
The display shows
Enter the new PIN and confirm with the
➔
The display shows
Enter the new PIN a second time and confirm with the
➔
The new PIN is stored.
Notes:
• For each digit entered, the display shows an "*".
• You can also change the PIN with function code *47 (see User Guide
Function Codes on the
softkey.
Select
softkey.
Select
and press the
Select
User PIN.
Ok
New user PIN.
Ok
Confirm user PIN.
Mitel DocFinder).
softkey.
Menu
softkey.
softkey.
softkey.
softkey.
Ok
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015