Mitel 622 DECT User Manual page 45

Transferring a call partner
You want to put your call partner through to someone else.
With the function you can connect your call partner with someone else. You can
Enquiry
connect internal and external users with one another.
Enquiry
<Phone number>
Connect
Parking a call partner
You want to put your call partner on hold without using a phone line as a result.
You can park your call partner locally. A locally parked call partner can only be retrieved
by the phone from which the function was initially carried out.
You can also allocate the Park function to a freely configurable key (see chapter "Confi-
guring keys", page 91).
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
You are making/taking a call:
Press the softkey.
Enquiry
Enter the phone number of the enquiry call party.
➔
Enquiry call party is called; first call partner is on hold.
Note:
You can also find the call number of the user you want in the phone book
or in a call list.
Connecting with notification:
Wait until the person has answered the call. Announce the call party.
Press the
Connect
➔
Your first call partner and the other person are now connected with
each other.
Note:
If the other user does not answer, you can cancel the enquiry call with the
softkey and take back the first call.
End call
Connecting without notification:
Wait for the first ringing tone, then press the End key.
➔
The other party is then called directly by your first call partner.
Note:
Recall: If the other party does not answer, the call comes back to your
phone.
softkey or the End key.
Supplementary features
45