Mitel 622 DECT User Manual page 59

Tracking a malicious call
Your are being threatened or molested by a call. You want to identify the caller.
Using the (MCID: Malicious Call Identification) function the provider records the following
call data: Your phone number, the caller's phone number, and the date and time of the
call.
MCID has to be enabled by your provider. Your provider will inform you about accessing
the recorded call data.
This function must be stored under a function key (see chapter "Configuring keys",
page 91).
MCID
MCID
Activating personal call routing
You wan to specify which of your phone shall ring when you receive a call.
If your system administrator has set up a phone number with several phones for you as
well as the call routings (One-number user concept, see chapter "Purpose and function",
page 8), you can specify which of your phones shall signal a call by using the personal
call routing. Your system administrator can set up up to 5 call routings. You can only
answer a call on phone where the call is signalled. Contact your system administrator for
more information.
You can activate a call routing for all phones. If you have not configured a call routing, the
default setting (all phones are ringing) is used as standard.
This function can also be stored under a configurable key (see chapter "Configuring
keys", page 91).
Settings
General
Personal call routing
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
During a call:
Press the function key for MCID.
After the call do not hang up: press the function key for
hear the busy tone.
Activating personal call routing:
Press the navigation key to the right or the
Scroll to and press the
Settings
Scroll to and press the
General
Scroll to
Personal call routing
Supplementary features
Menu
softkey.
Select
softkey.
Select
and press the
Select
while you
MCID
softkey.
softkey.
59