Mitel 622 DECT User Manual page 73

Unlocking your phone
You want to unlock your phone.
You can use the PIN to unlock your phone. If you have forgotten your PIN, your system
administrator can reset it to the default setting.
Activated features
<Barring>
<PIN>
Free
Activating range alarm and system busy beep
You want to set the system parameters with your cordless phone.
The
Range alarm
weak. You can set the phone so that you receive a warning signal if you leave the cover-
age area.
You are making a call and are getting near the limit of the radio area: A warning signal
sounds in the loudspeaker and the LED indicator is flashing red. If you leave the radio
area, the call is disconnected.
The
System busy beep
system is available again.
Settings
General
Range a./ System b.beep
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
Press the navigation key to the right or the
Scroll to
Activated features
Select the barring you want and press the
➔
You are prompted to enter your PIN.
Enter the PIN and confirm with the
Scroll to and confirm with the
Free
➔
The phone is unlocked.
➔
To unlock all your phones, execute the function code #33* <PIN> #
(see User Guide Function Codes on the
indicates that the connection between your phone and the system is
tells you that the system is overloaded – you need to wait until the
Press the navigation key to the right or the
Scroll to
Settings
Scroll to
General
Scroll to
Range alarm/System busy beep
switch on or off.
and press the
Ok
Select
and press the
Select
and press the
Select
Personalizing your phone
softkey.
Menu
softkey.
Select
softkey.
Reset
softkey.
softkey.
Mitel DocFinder).
softkey.
Menu
softkey.
softkey.
and use the
Select
softkey to
73