Mitel 622 DECT User Manual page 62

Supplementary features
There is no time limit to the duration of a verification call, which must be terminated on the
destination phone or on the monitoring handset. Once the call has been cleared down,
the monitoring phone immediately switches back to monitoring mode.
Settings
Room monitoring
<Room monitoring
setting>
Enable room monitor-
ing
Reset
62
Press the navigation key to the right or the
Scroll to and press the
Settings
Scroll to
Room monitoring
Room surveillance settings:
1. Scroll to Mode, select the room monitoring mode you want and
press the
Select
2. Scroll to Sensitivity, select the level you want and press the
softkey.
3. Scroll to
Activation
the softkey.
Select
4. Scroll to
Destination
press the softkey.
Save
Note:
Test call destination
have entered to make sure it is correct.
Activating room monitoring:
Scroll to
Enable room monitoring
➔
You hear the acknowledgement tone and the display shows the
destination number after 10 seconds. The
the microphone for room monitoring is activated.
To deactive room monitoring:
Press the softkey.
Reset
Or:
Press >
Menu Activated features
➔
Room monitoring is now deactivated.
Select
and press the
softkey.
delay, select the destination you want and press
number, enter the destination number and
> allows you to test the phone number you
Select
and press the
> Reset.
softkey.
Menu
softkey.
softkey.
Select
softkey.
Select
symbol shows when
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
Select