Using A Headset - Mitel 622 DECT User Manual

Using a headset

To make a phone call with the headset.
If you answer a call in headset mode using the Call key or Loudspeaker key, the call is
provided on the headset.
Note:
If you loose the radio contact with a Bluetooth headset, you can go back into the radio
area without being disconnected from the active connection.
<-->
Headset Handset
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
Your phone is ringing. To answer the call, proceed as follows:
Press the Call key or Loudspeaker key.
➔
The call is provided on your headset.
Press the Loudspeaker key.
➔
The phone's microphone is switched on and the headset microphone
is switched off.
You can use the
Headset
Ending a call:
Press the End key.
Notes:
• To find out how to activate the headset, refer to the chapter "To acti-
vate headset mode", page 79.
• To find out how to connect a Bluetooth headset, refer to chapter "Acti-
vating Bluetooth mode and Bluetooth devices", page 80.
• To call a user, select the user's phone number and press the Call key
or Loudspeaker key.
• For more information refer to your headset's user's guide.
or softkey to switch modes.
Handset
Dialling and phoning
25