Setting The Volume - Mitel 622 DECT User Manual

Personalizing your phone
Setting the LED indicator
You want the attention LED to inform you of any phone incidents.
You can switch the LED on or off for the following events:
• Service: The phone is switched on.
In
•
Incoming call
• About: Callback, voice message, text message
•
Appointment call
•
Hands-free
•
Low battery
The significance of the LED colours is explained in the chapter "Indicator LED signals",
page 32.
Settings
LED indications
<LED setting>

Setting the volume

All the ring tone properties are set using the audio profiles, see chapter "Audio
profile settings", page 77.
Setting the volume during a call
You want to adjust the volume while in a call. You have to set the volume of handset and
loudspeaker separately.
The new volume will remain stored even after the call is ended.
76
Press the navigation key to the right or the
Scroll to and press the
Settings
Scroll to
LED indications
Scroll to the LED setting you want and activate or deactivate it with the
softkey.
Select
Louder: Press the upper sidekey during the call.
Quieter: Press the lower sidekey during the call.
Menu
softkey.
Select
and press the
Select
softkey.
softkey.
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015