Table of Contents
Advertisement
Mitel 700 DECT Phone User Guide
Note: You can also access the Info menu/Call list using the Navigation menu (see
line and idle display" on page
the idle state.
CALLING FROM THE SYSTEM'S CALLER LIST
Check to see which list (local / system) has been set on the display (see "List access" on
page 56). Depending on whether or not the phone number is transmitted, your communication
system stores the phone numbers of missed calls or calls made while the phone was busy.
Depending on the system equipment, 30 or 50 entries can be stored.
In idle mode, press the left navigation key. The Info menu appears.
Use the navigation keys to select
Ok
to display additional information about the entry.
Press the Call key (green). The selected entry is called.
Note: You can also access the Info menu/call list via the Navigation menu (see
line and idle display" on page
idle mode.
ENDING CALLS
You can end calls by pressing the End key.
OPTIONS DURING A CALL
If required you can select a call number from the available lists and dial into an existing connection
(DTMF suffix dialling).
Press ••• and select a call number from the following lists:
• Personal directory
• Redial list
• Caller list
ANSWERING A CALL DURING A CALL (CALL WAITING)
If you do not want to be disturbed, you can switch off the call waiting function (see
Menu] menu" on page
36
15) or via the Menu Access ••• when the DECT phone is in
Caller list
15) or via the Menu Access ••• when the DECT phone is in
53).
, then the name or the phone number. Press
"Softkey
"Softkey
"[System
Advertisement
Table of Contents
