Mitel 622 DECT User Manual page 93

New
Modify
Delete
Notes:
• The selection of functions can be found in the chapter "Function selection for configu-
rable key", page
• In addition to the large number of predefined functions you can also write your own
function (see chapter
Function selection for configurable key
This section contains a list of all the functions you can store under a configurable key via
the menu. Contact your system administrator for more information.
More information on how to store functions under a configurable key using function com-
mands and function code can be found in chapter "Formulating functions", page 96.
Function
Call Forwarding
Call forwarding if busy
Call Forwarding on No
Reply
Switch group x
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
Creating a new key assignment:
1. Press the softkey and select
New
2. Select the function and the setting you want and confirm with the
softkey.
➔
Key assignment is stored.
Modify a key assignment:
1. Press the
Modify
2. Make the changes and confirm with the
➔
The key assignment is now stored.
Deleting a key assignment:
Press the softkey.
Delete
➔
Key assignment is deleted.
93
.
"Function commands, function codes"
Description
With this function you forward incoming calls directly to a different
destination. For further information refer to chapter "Forwarding calls
(Call forwarding)", page 49.
With this function you forward incoming calls directly to a different
destination if you are busy. For further information refer to chapter
"Forwarding calls (Call forwarding)", page 49.
With this function you forward incoming calls you receive on your
phone to another destination. For further information refer to chapter
"Forwarding a Call on No Reply (CFNR)", page 50.
This function lets you route calls and functions via switch groups.
Each switch group has three switching positions. The default position
is 1.
Function
softkey.
Personalizing your phone
key.
softkey.
Save
96
, page ).
Save
93