Additional In Call Functions; Customizing The Menu Tree; Incoming Call; Answer A Call - Mitel DT4X3 User Manual

Mitel DT4x3 Cordless Phones for MiVoice MX-ONE

5.9.1 ADDITIONAL IN CALL FUNCTIONS

Besides the default In Call functions, it is possible to define 10 extra system specific
codes/general purposes. See the handset's Configuration Manual.

5.10CUSTOMIZING THE MENU TREE

The menu tree can be customized by hiding some of the functions that are available
but for example not in use. Which functions that should be hidden are defined in the
PDM. See the handset's Configuration Manual.
6 CALLING

6.1 INCOMING CALL

The flashing LED, accompanied by a ring signal and/or a vibrating handset, gives a
notice of a call. Ring signal and vibrator can be disabled, see
on page 62.
Settings
The calling party's handset number or name is shown. The name will be shown if the
calling party's handset number is stored in the local phonebook.

6.1.1 ANSWER A CALL

When the signal sounds, press
loudspeaking mode
information is available.
Tip: When a headset is connected to the handset, the headset button can be used to
answer the call. In addition, it is possible to configure the headset button with a specific
function, such as post-dial, dial last called number, or dial a predefined number. See
the handset's Configuration Manual.
Other answering methods can also be set in the Settings menu, see
page 62. The answering methods are; Automatically and Loudspeaking.
When Automatically is enabled, all incoming calls will be connected automatically.
Call Pick-Up
To answer a call to a phone in another room
1 Dial the number and press
2 When you hear a busy tone, Press 8 (France and New Zealand: Press 4
Sweden: Press 6)
1.When Bluetooth is enabled, the loudspeaker audio is lowered due to current limitations in the intrinsically safe
handset.
1424-EN/LZT103 089 D1 2016-03-04
to answer the call, or press
1
. The name/number of the calling party is displayed if calling line
8.8.1 Sound and Alert
to answer the call in
8.8 Settings on
29