Safety Information - Mitel 622 DECT User Manual

Product and safety information

Safety information

Failure to observe this information can be hazardous and infringe existing laws.
Medical equipment
Inform yourself if the use of radio equipments (cordless phones) is approved
near medical devices. Observe the alert messages and instructions.
Availability of telephone connections
Do not rely on your cordless phone as your only means of communication in
emergency or critical situations. Availability cannot always be guaranteed.
The device will be inoperable when mains power of the communication sys-
tem fails.
Risk of explosion through sparking
On premises subject to explosion hazards only use ATEX models specially
approved for that purpose.
Hands-free mode and Ringing tone
Do not hold the cordless phone up against your ear in hands-free operation
and during ringing tone, as the volume is then very high. The default setting for
ringing loudness meets regulatory requirements. It is recommended the
default setting is retained.
Mains power
Use the original power supply only (ID: 23-00-1089-00 Connect the power
supply only to power sources that conform to the indications on the power
supply.
Maintenance
Make sure all installation and repair work is carried out by a specially qualified
technician. Do not touch the charging contacts with sharp, metallic, and/or
greasy objects.
Always use a soft, moistened, or antistatic cloth to clean your device. Do not
use chemicals or other chemical products.
Cost control and Data protection
1
You should protect your phone with a PIN so that no-one can make phone
5 20
calls at your expense. A code will also protect your personal settings. When
carrying the cordless phone around, you should lock the keypad so it cannot
be accidentally activated.
6 Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015