Display Settings - Mitel 622 DECT User Manual

Display settings

This section explains how to set display properties.
Setting the display
You want to optimise the display settings.
You can activate or deactivate the following settings:
• Font: Font size
•
Color scheme
•
Backlight
– Brightness: Display brightness.
– timeout: Amount of time the keypad and display backlight remain switched on
Idle
after you press a key.
–
Charging unit
switched on when the cordless phone is placed in the charging unit.
–
Backlight during
entire duration of a call.
Note:
If you do not switch on the
is switched off automatically 10 seconds after the call is set up. If you receive another call
or an alarm, the backlight is switched back on again for 10 seconds in each case.
Settings
Display
<Display setting>
<Display setting>
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
timeout: Amount of time the keypad and display backlight remain
call: Switch on the function to ensure the display remains lit for the
Backlight during call
Press the navigation key to the right or the
Scroll to
Settings
Scroll to and press the
Display
Scroll to the display setting you want and press the
Select the display setting you want.
Note:
The softkey displays the colour scheme you want.
Select
➔
The setting is stored.
setting, the keypad and display backlight
and press the
Select
Select
Personalizing your phone
softkey.
Menu
softkey.
softkey.
Select
softkey.
75