Mitel 622 DECT User Manual page 50

Supplementary features
Call Forwarding
User
Forwarding a Call on No Reply (CFNR)
You want calls that you receive on your phone to be forwarded to another destination.
Both your own phone and the other destination will then start ringing. The system configu-
ration determines whether or not there is a ringing delay at the other destination. Whoever
goes off-hook first, answers the call. Depending on the system configuration, Call For-
warding on No Reply can also be activated when your phone is busy.
Notes:
• Call forwarding applies to all connected phones, in the one number user concept.
• Only one forwarding variant at a time is possible.
Forwarding
Call Forw. on No Reply
User
50
Scroll to
Call forwarding
Scroll to and confirm with the
User
Enter the user's phone number and confirm with the
➔
Forwarding is activated.
Note:
You can also find the call number of the user you are looking for in the
redial list.
To deactivate forwarding:
Press >
Menu Activated features
Notes:
• If a call is to be forwarded only when you are already in a call, select
Forwarding if busy.
• You can also forward to your
voice mail", page 51) or to a
to a message", page 52).
• You can also activate forwarding by remote control, see chapter "Set-
ting functions by remote control", page 69.
To activate forwarding:
Press the navigation key to the right or the
Scroll to
Forwarding
Scroll to
Forwarding on no reply
Scroll to and confirm with the
User
Enter the phone number of the destination to which your calls are to be
forwarded and confirm with the
➔
Call forwarding is enabled.
and confirm with the
softkey.
Ok
> Reset.
Voicemail
Text message
and press the
Select
and confirm with the
softkey.
Ok
softkey.
Ok
Softkey.
Ok
softkey.
Ok
(see chapter"Forwarding to
(see chapter "Forwarding
softkey.
Menu
softkey.
softkey.
Ok
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015