Mitel 622 DECT User Manual page 65

Hotline
The hotline is typically used for lift phones, emergency phones, or for baby alarms or hot-
line in the accommodation/hotel branch.
A user needs help and picks up the handset or presses the loudspeaker key. The user is
automatically routed to the preconfigured hotline destination number stored in the com-
munication server. The person responsible answers the call and is connected with the
user seeking help.
Alarm cancellation delay: Your system administrator can set a delay (0-60 seconds,
depending on the Mitel system phone). During this delay the user can enter another call
number in order not to trigger a call on the hotline destination number. If the user does not
dial another phone number during this predefined time or puts the handset back down
again, a connection with the Hotline number is automatically set up. Contact your system
administrator for more information.
Note:
The hotline is integrated in your communication system. Information on hotline alarm with
Mitel Alarm Server can be found in the chapter
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
User needs help:
User picks up the handset of his phone or presses the loudspeaker key.
➔
A connection with the hotline number is automatically set up after a
predefined time without the user having to do anything else.
Supplementary features
"Hotline Alarm"
, page
68
.
65