Using Functions Before/While In A Call - Mitel 600 Series User Manual

Answering the call:
Press the
➔
The first call party is put on hold. You are now connected with the party who
initiated the call waiting.
Note: More information is available in "Enquiry and brokering during a call", page 33 /
"Making a conference call", page 34.
Rejecting the call:
Press the
➔
You remain connected with the original call party. Depending on the system
configuration the call-waiting party hears the busy tone or he is forwarded to
a preconfigured destination.
Ending a current call:
Press the
➔
The first call is terminated. You are now connected with the party who initiated
the call waiting.

Using functions before/while in a call

This section explains the special features provided by your phone
before you make a (second) call or while you are in a call.
Putting a call partner on hold
You want to briefly interrupt the active call.
You can put the call party on hold and then take them back again on the
same phone.
Hold callback: You can specify after how long you want to be reminded of
a held call or whether you would like to switch the function off.
Putting a call partner on hold (you are in a connection):
Press the function key for
Scroll to
➔
Your call party is put on hold.
Mitel 600 SIP-DECT Phones
eud-1657/1.0 – R4.0 – 06.2015
Answer softkey.
Reject softkey or the End key.
End call softkey.
Menu
Hold and press the
( ).
Ok softkey.
Phoning
31