Starting An Announcement - Mitel 622 DECT User Manual

Reject
End call

Starting an announcement

You want to address internal users directly via their loudspeaker – where available –,
without waiting for a reply (similar principle to that of an intercom system).
Requirement: It is essential that the internal user has not barred his phone against
announcement (for configuration see the chapter "Activating protection against call
types", page 86).
Notes:
• Intercom (duplex mode) is a special form of announcement whereby the phone of the
called user immediately transforms your announcement into an internal connection.
Depending on the system configuration your call party can answer your announcement
directly in intercom, without having to press a key. Contact your system administrator
for more information.
• If the called user has several phones in the one number user concept with activated
hands-free, any phone (the quickest) answers the call.
<Phone number>
Announcement
Ok
Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
Rejecting the call:
Press the softkey or the End key.
Reject
➔
You remain connected with your original call partner. Depending on
the system configuration the call-waiting party hears the busy tone or
he is forwarded to a preconfigured destination.
Ending a current call:
Press the softkey.
End call
➔
The first call is terminated. You are now connected with the party who
initiated the call waiting.
Enter the call number and press the
➔
The call number is displayed.
Note:
You can also find the call number of the user you want in the phone book
or in a call list.
Confirm the user with the
➔
User is made aware of the announcement. You can now talk.
Or:
You can also start the announcement using
> User/Group.
Announcement
Announcement
softkey.
Ok
Menu
Supplementary features
softkey.
>
Call features
>
41