Table of Contents
Advertisement
11.3.7.
Copy position data for SQ Direct Function from controller to USB
Since this software Ver.2.3, "*SQ Direct" is displayed in the top of the program list when connecting with controller
which can use the SQ Direct Function.
1) Select the [Robot] in the Program list screen, select the "*SQ Direct" (<a>) in the list, and tap the [Copy/Move]
button (<b>). The Copy/Move screen will appear.
2) Confirm that "*SQ Direct" is selected in the [Source] list, select the [USB] (<c>) as the destination and tap the
[Copy] button (<d>).
3) "Setting for copy" screen will appear. The position data for SQ Direct Function needs to change its file name to
copy. Tap the [Edit] button, and input the saved file name. (<e>)
Tap the [OK] button (<f>), the position data for SQ Direct Function is saved on the USB memory as a file.
1)
<a>
2)
<d>
CAUTION
Do not write-protect the USB memory when you do the operation as write
to it.
Even if it seems to have been able to write it without the error occurring by the operation copy and
delete etc., when write-protection of USB memory is released, all operation is canceled. And an
empty (size 0) file might be generated.
The position data for SQ Direct Function in the controller cannot move to the USB memory. Only copy operation is
available.
<c>
70
<b>
3)
<e>
<f>
Advertisement
Table of Contents
