Stop Signal - Mitsubishi R56TB Instruction Manual

[Load] / [Save] / [Delete signal file in robot]
<d> <e>
The edited result can be saved on or loaded to a personal computer or robot controller. Specify the save
destination / load destination and tap the [OK] button. If the save destination is a personal computer, a file name
can be specified. However, if the save destination is a robot controller, the result will be overwritten on the previous
information.
The file can be deleted with the [Delete signal file in robot] button. (<f>)

15.3.2.3. Stop signal

The state of the stop signal (stop, emergency stop) input into the robot controller can be referred to.
<f>
105