15.3.2.4. Register
This screen cannot be referred to if the CC-Link option card is not mounted on the
robot controller.
The values of the CC-Link function input registers can be monitored.
<a>
The input registers
are pseudo-input.
1) Monitor setting
The register to be monitored can be changed. Please tap the [Monitor setting] button. (<b>)
Caution
W hen a large amount of information is monitored, the communication size with the robot
controller will increase, and it may take time to update the inf ormation.
It is recommended to monitor only the required registers with the monitor setting.
<b>
The register to be monitored can be
changed. (For example, monitoring of only
No. 6000 is possible.)
106
<c>
The output registers
are forcibly output.