Multiple Cpu - Mitsubishi R56TB Instruction Manual

17.4.22. Multiple CPU

You can set the parameters related to the Multiple CPU to use the CR750-Q/CRnQ-700 series robot controller.
These parameters can be set when you are connected to CR750-Q/CRnQ-700 series robot controller.
This function can be used with Version 3.2 or later of this software.
You can check the number of points input and range of total by tapping the [Check] button.
Please refer to the manual of Universal model QCPU (QCPU User's Manual (Multiple CPU System)) for details
of Multiple CPU setting.
172